Using The Looper - Boss Cube Street II Owner's Manual

Using the Looper

Record standby
Press the [LOOPER] button to
enter record standby mode.
Record
When audio is input,
recording starts immediately.
Press the [LOOPER] button
to play back from the point
where you want to loop.
* Once you reach the maximum available recording time, the unit automatically switches to playback mode.
* Recording/playback is done using the same levels used for each channel during recording.
REC/PLAY indicator display
Operating the looper with a footswitch
You can also operate the looper by using a footswitch (FS-5U, FS-6 or FS-7, sold separately).
5 If a footswitch is connected, recording starts not when audio is input but when you press the footswitch (connected via the plug tip). Playback and
overdubbing operations are the same as when using the [LOOP] button.
5 If you press the footswitch (connected via the plug tip) twice in one second, the looper stops.
5 If you hold down the footswitch (connected via the plug tip) for two seconds or longer, the phrase is cleared.
Using This Unit with Other Mobile Devices (i-CUBE LINK)
With the "i-CUBE LINK" feature, you can use the included mini cable (4-pole) to connect your mobile device, so that audio can be played back from that
device while the sound of your guitar playing or mic signal from this unit is sent to the mobile device.
Use this feature to play back or record sound from your guitar or mic to your mobile device, or stream your live performance over the Internet.
Mobile device app
Guitar/mic sound
The sound of your guitar or mic is
sent from this unit to your mobile
device.
Loop playback
The loop plays back.
Pressing the [LOOPER]
button switches to
overdubbing.
Indicator Explanation
REC
Blinks while in record standby, lights while recording.
PLAY
Lights up during playback, and blinks when stopped.
DUB (REC+PLAY)
The REC and PLAY indicators light when overdubbing.
Audio from mobile device
Audio from mobile
device
+
Guitar/mic sound
Stop/clear
To stop, press the [STOP]
button.
To clear the phrase, hold down
the [STOP] button for at least
two seconds while stopped.
Overdubbing
Record additional layers
while playing back the loop.
Press the [LOOPER] button
to switch to playback.
For details on i-CUBE LINK and on mobile device apps that can use
i-CUBE LINK, see our website shown below.
https://www.boss.info/
Useful Functions
7