Intel R440LX Product Manual page 44

MultiBoot Group
Boot Device Priority
MultiBoot Group—the sequence that you specify on the menu in the
MultiBoot Group will determine the boot order. If secure mode is enabled
(a user password is set), then you will be prompted for a password before
the system fully boots. If secure mode is enabled and the "Secure Boot
Mode" option is also enabled, the system will fully boot but will require a
password before accepting any keyboard or mouse input.
SCSI ROM BIOS Options Group
SCSI-A ROM BIOS Scan
Management Subsystem Group
System Sensor Control
System Management Mode
Event Logging
* Select and enter values to be used by server management software.
The options in the Management Subsystem Group are used to
•
Set up motherboard voltage and temperature scanning by determining
the appropriate thresholds
•
Enable or disable a system speaker
•
Scan the flash memory area for binaries that extend or alter critical
event logging
This section does not list the sensors that will be displayed for configuring,
because the list depends on information provided by the system at run-time.
The information is placed in the system during manufacturing and assembly
and depends on the particular configuration of the system.
44
Menu for Boot Devices
Enable
Disable (if disabled, the SCSI-A channel is fully
configured, but the ROM scan is skipped)
Press <Enter> to modify the System Sensors.*
Enable/Disable
Enable/Disable
Chapter 2 - Configuring the System