Dremel Ultra-Saw US20V Operating/Safety Instructions Manual page 14

US410
Application
Paint Concrete
Removal Masonry
Brick
Subflooring
Thinset
Removal
Cement Board
Flooring
Cement
Prep
reduce the risk of starting the tool accidentally.
Inserting and Releasing
Battery Pack
Slide charged battery pack 9 into the
housing until the battery pack locks into
position (Fig. 2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the tool
housing, should it become loose during
use.
To remove the battery pack, press the
battery pack release button 10 and slide
the battery pack 9 completely out of
tool housing (Fig. 2).
Dremel US20V Accessories
Concrete Surface Prep Wheel
Diamond Embedded wheel for thinset removal and paint removal from
concrete and brick.
Surface Prep
Material
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories. Such preventive safety measures
US410
Concrete
Surface Prep
X
X
X
X
X
X
Assembly
-14-
Fig. 2
10 9