Dremel Ultra-Saw US20V Operating/Safety Instructions Manual page 13

or property damage.
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
Wood & Plastic Carbide Wheel
US500
Abrasive cutting wheel with carbide grit which is intended to cut wood
and other soft materials.
Metal Cut-off Wheel
US510
Reinforced Type 1A (ISO 41) Abrasive cut-off wheel which is intended to
cut a variety of materials such as metal and plastic.
Masonry Cut-off Wheel
US520
Reinforced Type 1A (ISO 41) Abrasive cut-off wheel which is intended to
make score cuts in masonry and stone.
Diamond Tile Wheel
Diamond Type 1A (ISO 41) abrasive wheel which is intended to make
US540
cuts in hard materials such as porcelain and tile, and make score cuts in
brick and concrete.
Wood & Plastic Flush Cut Carbide Wheel
US600
Offset Type 27A (ISO 42) abrasive cutting wheel with carbide grit which
is intended for flush cutting of wood and other soft materials.
Material
Plywood
Pine
Poplar
Wood
Oak
Composite (OSB, fiberboard)
Laminate flooring
Drywall Drywall
Copper Pipe
Conduit
Coated Wire Shelving
Metal
Aluminum sheet, gutter, fascia
Galvanized sheet metal
Threaded rod
Plexiglass (sheet plastic)
Plastic Vinyl siding, gutter
PVC pipe
Tile Wall Tile
Tile
Floor Tile
Brick Fascia
Masonry Cement board
Pavers
Other Fiberglass
Dremel US20V Accessories
Use only Dremel US20V, high-performance accessories. Other
accessories are not designed for this tool and may lead to personal injury
US500 US510
Wood/Plastic Metal Cutting
Wheel Wheel
X
X
X
X
X
X
X
X
X
X
X
X
X
X X
X X
X X
X
-13-
Cutting
US520 US540
Masonry Diamond
Cutting Wheel Tile Wheel
X
X
X X
X X
X
US600
Wood/Plastic
Flush Cut
X
X
X
X
X
X
X
X
X
X
X