Tool Specifications; Part List; Intended Use - IVT CSD Li-14.4G-RC Instruction Manual

Instruction manual

TOOL SPECIFICATIONS

EN
Battery pack voltage [V - Ah]
Type of battery
Charging time [h]
No load speed [RPM]
Max torque [Nm]
Torque settings
Chuck capacity [mm]
Drilling capacity (in steel) [mm]
Drilling capacity (in wood) [mm]
Drilling capacity (in metal) [mm]
Vibration level [m/s
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Weight [Kg]
Weight (+ battery pack) [Kg]
Safety class (battery charger)

PART LIST

1. Torque control
2. Rotational direction switch
3. On/Off switch
4. Battery pack
5. Battery charger
6. Selector speed
7. Battery release button
8. Keyless drill chuck
9. LED lamp
CONTENT OF THE BOX
Instruction manual (1 pc), battery pack (1 pc), battery
charger (1 pc).

INTENDED USE

This tool is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Model
]
2
CSD Li-14.4G-RC
14.4 - 1.3
0-400 / 0-1450
2.5 (K=1.5)
77 (K=3)
88 (K=3)
Retain this user's manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙ The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙ Never leave the tool unattended.
∙
Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙ Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is in use.
∙
The user is responsible for third parties while
working with the tool.
∙
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
6
Li-ion
3 - 4
27
18+1
10
10
25
10
0.925
1.215
II