Led Status Indicators - Extreme Networks ExtremeSwitching ISW Series Quick Installation Manual

Figure 4: Alarm Relay and Ground Connector

LED Status Indicators

Table 3: LED Status Indicators
LED
P1
P2
Alarm
Copper ports Link/Act
Copper ports Speed
SFP port Link/Act
SFP port
Speed
ISW Series Managed Industrial Ethernet Switch Quick Installation Guide
State
On Green
Off
On Green
Off
On Red
Off
On Green
Flashing Green
Off
On Yellow
Off
On Green
Off
On Yellow
Off
Industrial Series Switch Overview
Description
P1 power line has power
P1 power line disconnect or does not have
supply power
P2 power line has power
P2 power line disconnect or does not have
supply power
Alarm event occurs
No alarm
Ethernet link up but no traffic is detected
Ethernet link up and there is traffic detected
Ethernet link down
A 100 Mbps or a 1000 Mbps connection is
detected
No link or a 10 Mbps connection is detected
Ethernet link up
Ethernet link down
SFP port speed 1000 Mbps connection is
detected.
No link or a SFP port speed 100Mbps
connection is detected
12