Redialing Calls - Lucent Technologies 9630 User Manual

Operating the 9630 Series WT
4. Reenter the password for verification. If the passwords match, a screen
indicating that your new lock password is now active is displayed. If the
passwords do not match, you are taken back to the lock password creation
screen in Step 4.
5. Press either
Deleting the Password
To delete your lock password, do the following:
1. From the calling screen, press
2. Press
3. Press the Del soft key. A screen that allows you to delete your password is
displayed.
4. Enter the password to be deleted in the space provided. If you enter a valid
password, a screen indicating that the password has been deleted is
displayed. If you do not enter a valid password, a message to this effect is
displayed, and you are taken back to the screen with the Del soft key in
Step 3.
5. Press either
Unlock Operation
If a WT is locked and linked to the system, a padlock icon appears in the display.
To unlock your WT, do the following:
1. From the calling screen, press any key.
2. Enter your (un)lock password in the space provided. If you enter the correct
password, your terminal is unlocked and the lock icon disappears from the
display. If you enter an incorrect password, a message to this effect is
displayed, and you are taken back to the unlock screen.
NOTE:
If you cannot unlock the terminal, see your system administrator to reset the
password.

Redialing Calls

Press
Redial
number is indicated on the display. You need not press
up to the first 24 digits dialed. To redial a call, the WT must have an idle call
appearance.
or the Exit soft key to return to the calling screen.
Menu
.
Next
or the Exit soft key to return to the calling screen.
Menu
to redial the last number dialed from the keypad. The redial
Menu .
On/Off
Issue 1 May 1999
. The WT stores
3-15