Intel SBT2 Quick Start Manual page 16

6
Slide the termination card into the secondary processor slot. Make sure the
air baffle fits inside the retention mechanism. Push down firmly, with
even pressure on both sides of the top, until the card is seated in the
processor connector on the server board. See Server Board Components
on page 26 for the location of the secondary processor slot.
7
Move the retention wires over the plastic ejectors to hold the processor in
place. Make sure the air baffle is inside the retention mechanism and is
flush against the termination card.
B
A
16
B
A
OM10618
SBT2 Server Board Quick Start Guide
C
D
OM10619