Before Proceeding - Follett Horizon Elite Harmony HCD1010RHT Installation Instructions Manual

3.12
Dispenser diverter plate installation – CORNELIUS ED, DF and DB SERIES
ICE CHUTE
COVER
10-32 WASHER
Cornelius ED, DF and DB series only
These dispensers require the installation of an ice diverter at the dispenser opening.
• Disassemble chute assembly
• Discard factory restrictor plate
• Replace with alternate diverter plate (supplied)
3.13
Agitation adjustments –
These dispensers require modifications for compatibility with Chewblet ice. Agitation
times must be set to 1 second ON, 1 hour OFF and the ice restrictor plate must
be adjusted to the fully open position. See your beverage supplier for these
modifications.

BEFORE PROCEEDING

10
GATE MOUNTING PLATE
ICE DIVERTER
ICE CHUTE
10-32 NUT
Cornelius IDC and Flavor Fusion
remote condensing
STORAGE HOPPER
APPLY RTV TO THIS
SURFACE TO SEAL
TO HOPPER GATE
MOUNTING PLATE
GASKET
Prior to installing the docking assembly, ensure
that the drain fitting is oriented (right or left)
correctly for your installation. An optional straight
drain fitting is also supplied. You may need to
remove the back panel of the docking assembly
in order to re-orient or change the drain fitting.
Replace back panel prior to mounting the
docking assembly.
HARMONY • TOP-MOUNT
FLANGE EXTENDS INTO
STORAGE HOPPER
THROUGH GATE
OPENING