Download Print this page
Follett Horizon Elite Chewblet 1010 Series Manual

Follett Horizon Elite Chewblet 1010 Series Manual

Hide thumbs Also See for Horizon Elite Chewblet 1010 Series:

Advertisement

Quick Links

Features
Horizon Elite
1010 series - up to 978 lb (444 kg) in 24 hours
1410 series - up to 1372 lb (623 kg) in 24 hours
- automatically transport ice through a tube with RIDE
technology from up to 75' (22.8 m) away
- chewable, compressed nugget ice is preferred over
cubes
1
- Chewblet ice dispenses reliably from ice and
beverage dispensers
- available with approximately 1.00" (2.54 cm) long
standard Chewblet ice or optional 3/8" (0.95 cm) long
Micro Chewblet
ice
- quiet production without noisy harvest cycles
Revolutionary, scale inhibiting design
- produces ice that has 15% the TDS of the incoming
water for optimum dispensing and long life in drinks
- quarantines and regularly expels scale producing
dissolved solids to dramatically reduce scale buildup
- increases time between descaling and reduces or
eliminates the need for expensive scale treatment
- saves 35% water compared to comparable cubers
- meets 2018 Department of Energy regulations
- three phase models Energy Star
Durable, attractive ice machine
- regular bearing inspection or replacement is
not required
- upgraded, easy-to-read LED operating status and
diagnostic display
Designed with sanitation in mind
- Agion
silver-based antimicrobial product protection of
®
key ice and water contact components2
- floatless, sealed design inhibits formation of biofilms
- semi-automatic cleaning and sanitizing system
Warranty
- 3 years parts and labor, 5 years compressor parts
Certifications
1
Independent third party studies. Contact Follett for details.
Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.
2
Job
Item
®
certified
®
remote 1010, 1410 series Chewblet® ice machine
Short form specification:
Ice machine to be a Follett
Horizon Elite ice machine model
®
______________ [Insert size/series, condenser type and installation/
mounting, from model number guide] capable of producing compressed
nugget ice using an efficient, sanitary horizontal evaporator/auger system
and delivering ice by a flexible wire reinforced transport tube to
ice storage bin,
ice and water dispenser,
drop-in dispenser or
Ice Manager
evaporator with utility docking station, front-mounted unit status display,
evaporator water inlet at harvest end with automatic flush while producing
ice, and semi-automatic cleaning and sanitizing system, plus all the features
listed below and mounting/performance-enhancing accessories checked.
Horizon Elite remote 1010, 1410 series ice machine
For use with ¹
Install/mount Condenser V/Hz/Ph
with
top mount
without
ice storage bin
with
RIDE
without
Follett Vision
with
undercounter
RIDE
ice & beverage
without
dispenser
Cornelius PR150
with
undercounter
RIDE
ice & beverage
without
dispenser
2
with
top mount
3
countertop ice
without
& beverage
dispenser
with
(by others)
RIDE
without
drop-in
with
dispenser
RIDE
(by others)
without
Ice Manager
with
diverter
RIDE
valve system
without
Ordered separately
1
Not compatible with Micro Chewblet ice
2
Requires Harmony
top kit (see page 5 for part number)
3
For three phase remote condensing unit, replace third character (D) with F
4
e.g. HCF1010RBT
For Micro Chewblet ice, replace second character (C) with an M
5
e.g. HMD1010RBT
801 Church Lane | Easton, PA 18040, USA
1.800.523.9361 | 1.610.252.7301 | follettice.com
Horizon Elite
ice and beverage dispenser,
diverter valve system, slide-out
Item number
5
1010 series
115/60/1
HCD1010RBT
4
115/60/1
HCD1010NBT
115/60/1
HCD1010RBS
4
115/60/1
HCD1010NBS
115/60/1
4
HCD1010RVS
115/60/1
HCD1010NVS HCD1410NVS
115/60/1
HCD1010RPS
4
115/60/1
HCD1010NPS
115/60/1
HCD1010RHT
4
115/60/1
HCD1010NHT HCD1410NHT
115/60/1
HCD1010RHS
4
115/60/1
HCD1010NHS HCD1410NHS
115/60/1
4
HCD1010RJS
115/60/1
HCD1010NJS
115/60/1
HCD1010RMS HCD1410RMS
4
115/60/1
HCD1010NMS HCD1410NMS
Item number
5
1410 series
HCD1410RBT
HCD1410NBT
HCD1410RBS
HCD1410NBS
HCD1410RVS
HCD1410RPS
HCD1410NPS
HCD1410RHT
HCD1410RHS
HCD1410RJS
HCD1410NJS

Advertisement

loading

Summary of Contents for Follett Horizon Elite Chewblet 1010 Series

  • Page 1 For Micro Chewblet ice, replace second character (C) with an M e.g. HMD1010RBT Independent third party studies. Contact Follett for details. Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice. 801 Church Lane | Easton, PA 18040, USA 1.800.523.9361 | 1.610.252.7301 | follettice.com...
  • Page 2: Dimensional Drawing

    Accessories Dimensional drawing Harmony conversion top kit for ice and beverage dispensers (listed on page 5) Water filters (refer to form# 9905) Wall mount bracket (item# 00997098 ) Ice machine stand, height-adjustable (item# 00997080) Timer to control one or two ice machines Back View (item# 00967625) Longer ice transport tube, specify length: ___ ft/m in...
  • Page 3 Dimensional drawing Specification, condenser unit Horizon Elite 1010 series Horizon Elite 1410 series W1 Width 36.25" (91.4 cm) – all models 36.25" (90.1 cm) – all models D1 Depth 25.50" (64.8 cm) – all models 25.50" (64.8 cm) – all models H1 Height 26.10"...
  • Page 4 2. Top kit MSF30SC required with Coca-Cola Freestyle 7000. Top adapter 46412 and ice kit 46430 must also be ordered from Coca- Cola. Consult with Coca-Cola and Follett to qualify application prior to ordering. 3. See page 5-6 for critical clearance requirements.
  • Page 5 Requires minimum 0.50" (1.27 cm) clearance between back of dispenser and wall. Net height after installation of top kit (excluding height of ice machine). Consult with Coca-Cola and Follett to qualify application prior to ordering. Top adapter 46412 and ice kit 46430 must also be ordered from Coca-Cola.
  • Page 6 3 – Horizon Elite ice machine mounting accessories Optional wall mount bracket Optional machine stand Important specifier notes 1. For secure wall mounting, specify optional wall mount bracket. 2. Wall and fasteners must support the weight of the ice machine, bracket, supply water and ice.
  • Page 7: Remote Condensing Unit

    5 – Horizon Elite ice tube runs - specifier guidelines Long tube runs for RIDE remote ice delivery equipment Important specifier notes 1. 75' (22.8 m) maximum ice transport tube run. 2. Tubing routing bends must have a 6.00" (15.24 cm) radius or larger. 3.
  • Page 8 Chewblet, Follett and RIDE are registered trademarks of Follett LLC, registered in the US. Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin. Remote 1010, 1410 series ice machine...