Tension Calibration; Foot Pedal Test - Pfaff powerquilter 1600 User Manual

Tension Calibrati on
The Tension butt on on the Diagnosti cs menu resets the
tension device. Only calibrate the tension device under
the directi on of PFAFF® technical support.
When calibrati ng the tension, do the following:
1. Remove the tension knob.
2. Gently press the spring against the tension discs
while not compressing the spring.
3. While holding the spring in place, press Reset.
4. When calibrati on is complete, replace the
tension knob.

Foot Pedal Test

The Pedal test will help determine if there is a problem
with the powerquilter™ 1600 foot pedal. Slowly depress
the foot pedal, a percent of depression will appear in the
white box. The foot pedal should be controllable from
0 to 100%. Press the Home butt on to return to the
Main menu screen or the Tools butt on to return to the
Diagnosti cs menu screen.
™
powerquilter 1600 Quilti ng Machine User's Guide
| 35