Miele H 4412 BP Operating And Installation Instructions page 9

Table of Contents

Advertisement

~
Never add cold water to food on a
hot baking tray or directly onto food in a
hot oven. The steam created could
cause serious burns or scalding and
the sudden change in temperature can
damage the enamel.
~
Always ensure that food is suitably
cooked or reheated.
Some foods may contain
micro-organisms which are only
destroyed by thorough cooking at
temperatures over 70 °C for a minimum
of 10 minutes. Therefore, when cooking
or reheating foods, e.g. poultry, it is
particularly important that food is fully
cooked through. If in doubt, select a
longer cooking or reheating time.
It is important that the heat is allowed to
spread evenly throughout the food
being cooked. This can be achieved
by stirring and/or turning the food
during cooking.
~
Only plastic containers which are
declared by the manufacturer as being
suitable for use in an oven may be
used.
Other types of plastic containers melt at
high temperatures and could damage
the oven.
~
Do not heat up unopened tins or jars
of food in the oven. Pressure can build
up and they may explode, resulting in
injury or damage.
~
Do not push pots and pans around
on the oven floor as this could damage
the surface.
Warning and Safety instructions
~
Do not lean or sit on an open oven
door, or place heavy items on it. Make
sure that nothing gets trapped between
the door and the oven compartment.
This could damage the oven.
The oven door can support a maximum
load of 15 kg.
~
Do not use the appliance to heat up
the room. Due to the high temperatures
radiated, objects near the appliance
could catch fire.
Accessories
~
Only use genuine Miele spare parts
and accessories with this oven. If spare
parts or accessories from other
manufacturers are used, this may
invalidate the warranty, and Miele
cannot accept liability arising from
damages caused by or linked to these
items.
~
Remove all accessories as well as
the runners and any extra accessories
such as Flexi-Clip runners from the
oven interior before starting the
pyrolytic cleaning process. The high
temperatures needed for pyrolysis will
damage the accessories.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
9

Advertisement

Table of Contents
loading

Table of Contents