Table of Contents
Advertisement
6.1 Find & GO (Main menu)
As just mentioned, the fastest way to find your destination and start navigating is to
tap Find & GO in the Main Menu (4.1). This will put you on the Find screen, and as
soon as you pick a destination, The NVX430BT Navigator will immediately show the
Cockpit screen and start navigation. This means that if you plan your route to one of
your Favorite destinations, you only need two taps to start navigating.
Selection by tapping the map
It is also very easy to set your destination using the map. Just browse to your desired
destination on the map, tap it, and the Cursor menu with the possible actions will
then open automatically.
Note: When appearing automatically, the Cursor menu remains open for a few
seconds only. If you decide not to choose any of the actions listed, the menu closes
automatically. When you open it manually, it will remain until you close it or switch to
another screen.
Tip: If you want the selected point shown in the centre of the map, close and reopen
the menu or wait until it closes and open it again. By opening the Cursor menu
manually, the map will be moved to have the selected location in the centre.
6.2 Using the Find menu
The Find menu is accessible by the Find & GO button at the Main menu (4.1) or by
the Menu buttons of the map screens (4.5.7). The Find menu gives you various
possibilities for selecting a location.
71
Advertisement
Table of Contents
