Info - Audiovox NVX430 User Manual

you open the list during navigation, or the point where The NVX430BT Navigator
most recently recalculated the route. This means the list is permanently updated, and
via points drop out during the journey. The last item in the list is your final destination.
Use the arrows on the right to browse through the list and tap any line to highlight it.
You can perform the following operations:
• Add: you can add a new route point (or a new final destination if the
highlighted item is the last one in the list) after the selected point. The Find
menu opens automatically to let you search for an address, POI, coordinates,
one of your favorite destinations, or selects a point from the History list. As
soon as you select any of these, The NVX430BT Navigator returns to the Edit
screen and your selection appears right under the highlighted line.
• Delete: you can delete the selected point from the list. If the highlighted item is
the last one in the list, the previous via point will be promoted to be the final
destination.
• Optimize: you can optimize the order in which you will drive through the via
points, if there is no specific order you would like to keep. When tapping this
button, The NVX430BT Navigator reorders the list instantly to save you time
and fuel. Optimization is for via points only. Your starting point and destination
remain in their positions, of course.
• Up and Down: using these buttons you can reorder the list by moving the
highlighted item up or down in the list.
4.7.3.6

Info

This button opens the Route Information screen described in 4.6. This screen shows
information about the current route and has a few additional options to check and
modify your active route.
51