Factory: V.120 64k (Remote Access)
Call Type
Auto Answer
DTR Option
Flow Control
Protocol Type
Factory: Async BONDING 128k (Remote Access)
Call Type
Auto Answer
DTR Options
Flow Control
Protocol Type
Express Configuration Wizard
This section describes how to use the Express Configuration Wiz-
ard software to configure the Express XRT for three common ap-
plications: Internet access, remote access, and bulletin board
service (BBS) access.
The Express Configuration Wizard software and the application
software such as Chameleon™ for Internet™ access or ShivaRe-
mote for remote access should be installed on the computer.
The following procedures have been written for Windows 3.1 op-
erating systems. Other operating systems may vary.
Some features are not available in all versions of the Express Configura-
tion Wizard.
Starting the Express Configuration Wizard Software
After installing the Express Configuration Wizard Software, use
the following procedure to launch the software:
1. In the Windows Program Manager, open ADTRAN program
group.
2. Double click on the icon labeled Express Configuration. The
ADTRAN Express Configuration Wizard window is dis-
played.
61202.153L3-1
Chapter 4. Application Configuration
Data 64kbps
Enabled
Ignore DTR
Hardware
CCITT V.120
Data 64kbps
Enabled
Ignore DTR
Hardware
Async BONDING
Express XRT User Guide
39