Table of Contents
Advertisement
Chapter 2. Installation
Microsoft Windows 95 and Windows NT 4.0
Windows 95 Plug and Play
1. During the Windows 95 boot process, if the New Hardware
Found screen appears indicating ADTRAN Express XRT , se-
lect Driver from disk provided by hardware manufacturer . If
the Windows 95 New Hardware Found screen does not ap-
pear, skip the rest of this section and go to Windows 95/Windows
NT 4.0 Control Panel Modem Installation on page 8.
2. Insert the disk labeled Windows 95 and Windows NT into the
3.5" floppy disk drive.
3. Click OK . The Install From Disk screen should appear.
4. Click OK or use Browse to locate the correct disk drive.
5. Select ADTRAN Express XRT from the Drivers list.
6. Click OK . Windows installs the INF file and a modem labeled
ADTRAN XRT on the COM port to which the unit is connect-
ed.
7. Check for the device. From Star t, choose Settings , then Con-
trol Panel , then double click Modems .
8. The ADTRAN Express XRT should be listed under the General
tab in the Modems Properties dialog box.
9. Click OK .
10.Click Close .
11.Go to Express Configuration Wizard Installation for Microsoft Win-
dows 95 and Windows NT 4.0 on page 9.
Windows 95/Windows NT 4.0 Control Panel Modem In-
stallation
For Windows NT 4.0, you must be a member of the Administrator
Group to install a new modem.
1. From the Start button, choose Settings, then choose Control
Panel, then double click Modems.
2. If a modem has not been installed on the computer previously,
the modem installation process begins immediately. From this
menu, choose Add to begin installation of the Express XRT.
3. In the Install New Modem dialog box, check Don't detect my
modem; I will select it from a list.
4. Click NEXT.
5. Click the Have Disk button.
8
Express XRT User Guide
61202.153L3-1
Advertisement
Table of Contents
