Table of Contents
Advertisement
There are three methods available for configuring the Express
XRT: Express Configuration Wizard, VT 100 terminal, or AT
Commands.
Before configuring the Express XRT for any application, the Ex-
press XRT should be connected correctly for the application as de-
scribed in the chapter Installation on page 5.
Some features in the Express XRT do not take effect upon selec-
tion. This prevents unintentional reconfiguration of the Express
XRT during an active call. Items such as Bit Rate, Protocol, and
Call Type take effect only at the beginning of a new call.
Technical notes, documents and scripts can be found on the ADT-
RAN web home page at http://www.adtran.com under the Infor-
mation Desk. These provide information on how to use
ADTRAN products in specific applications on PC and Macintosh
platforms.
FACTORY DEFAULT CONFIGURATION
The Express XRT is shipped configured as follows:
Auto-Detect SPIDs/Switch
Switch Type
Call Type
Auto Answer
Call Screening
Call Routing
61202.153L3-1
Application Configuration
Disabled
Euro ISDN
Data 64K
Enabled
Answer Any
Speech/Audio calls to POTS
Express XRT User Guide
Chapter 4
37
Advertisement
Table of Contents
