NOTICE Potentially dangerous situation! ▶ Non-observance can cause damage to property. The following symbols for the specific dangers can be used within a warning note: Symbol Meaning Corrosive chemicals Hot plant components! GEMÜ C67 2 / 8 www.gemu-group.com...
Check the fixing of the valve when installing it on a device or distribution installation. ● 1 = Handwheel 2 = Indicator ring 3 = Central nut 4 = Pipe connections 5 = Service tool 3 / 8 www.gemu-group.com GEMÜ C67...
Page 4
2. Undo the central nut by turning it anti- clockwise. You can use a torque wrench to do this. ● Carefully undo the central nut by hand and remove the operator from the valve body. 4 / 8 GEMÜ C67 www.gemu-group.com...
Page 5
Diaphragm replacement – manual valve ● Move the operator to the closed position by turning the handwheel clockwise. ● Unscrew the diaphragm from the oper- ator by turning it anticlockwise. 5 / 8 www.gemu-group.com GEMÜ C67...
▶ Pay attention to the position of the fix- ing grooves in the body and the fixing lugs on the operator. These must fit to- gether exactly. 2. Position the central nut by hand and tighten it clockwise until hand-tight. 6 / 8 GEMÜ C67 www.gemu-group.com...
Page 7
(see torque table). Operator size 1 Torque (Nm) 10–12 14–16 25–30 3. Check the central nut after a week has passed and retighten it if necessary to avoid leakage. 7 / 8 www.gemu-group.com GEMÜ C67...