Syncing With Moneris - VeriFone UX 301 Quick Reference Manual

2. On the SETUP MENU, scroll down to ECR COM (using the CHQ
menu appears.
SETUP MENU
Info
Sync with Moneris
ECR COM
Language
3. The default method of communication with your ECR is serial mode. To change it, scroll down and select
one of the following:

LAN TCP. Select this method of communication if you used a LAN cable to connect to your ECR.
Note: The LAN connection uses dynamic IP addressing (DHCP) by default. To use static IP addressing,
contact your integration provider.

USB SER. Select this method of communication if you used a USB cable to connect to your ECR.
4. To return to the Setup Menu, press the CANC key on the UX100 PINpad.

2.7 Syncing with Moneris

The UX 301 is designed to sync with Moneris in order to retrieve configuration information. This can be done
through the "Sync with Moneris" function on the Setup Menu.
1. Press the FUNC key while the UX 100 displays the software version. There is a 2-second window during the
start-up process to access the Setup Menu. If you miss the 2 second window, refer to Restarting the
application on page 13.
Getting Started Guide - Moneris UX 301 with Direct Connect
CA 4.01-C
Please wait...
Attendez SVP...
key), then press the OK key. The ECR COM
ECR COM
RS232 SER
LAN TCP
USB SER
9