Diseqc™ Setup Screen 3 - EchoStar HDS-600RS Operation

DiSEqC™ setup screen 3
Allows the user to select the port to which the Freesat (Astra 28.2E) dish is
connected.
•
Red,
•
Green, =
•
Yellow, =
•
Blue
After this stage, the HDS-600RS will check for the home transponder on
both inputs. When this completes, the use is given on one of two options
•
Existing scan screen
•
Existing signal error screen
Note: If the home transponder cannot be seen on tuner 2, the usual
warning screen will be displayed.
= 1
2
3
= 4
7