Service - Graco 222695 Instructions - Parts Manual

Service

Service
• If the unit requires more than installation of a service
kit, it is usually quickest and easiest to send the unit
to the Graco distributor for repair or replacement.
• If the vanes need replacing or foreign material is
present in the motor chamber, an experienced
mechanic may remove the end plate opposite the
drive shaft end.
NOTICE
Do not pry with a screwdriver. It will dent the surface
of the plate and body, causing leaks. Use a puller
tool, which will remove the end plate while
maintaining the position of the shaft.
• New vanes should have the edges with cut corners
(or the notched edges, if the vanes are reversible)
pointing toward the bottom of the vane slot.
10 306565K