Grounding
The equipment must be grounded to reduce the risk
of static sparking. Static sparking can cause fumes to
ignite or explode. To reduce the risk of static sparking,
all electrically conductive objects or devices in the
spray area must be properly grounded.
Check your local electrical code for detailed grounding
instructions for your area and type of equipment.
There must be proper continuity between final mounting
setup and a ground. To ground the agitator, using a
grounding screw and washer, remove the grounding
screw (A) and lockwasher (B). See F
ground wire terminal (C) to the agitator with the screw
and lockwasher. Connect the other end of the ground
wire to a true earth ground.
To order a ground wire assembly, order part number
237569, Ground Wire and Clamp.
F
. 3: Ground the Agitator
IG
306565K
. 3. Secure the
IG
C
B
A
Installation
7