Using the Command and Response Table
The
Command and Response Table for SIS Commands
starting on page 48 lists the
commands that the DSC scaler recognizes as valid, the responses that are returned to the
host, a description of the command function or the results of executing the command, and
some examples of the command syntax in ASCII.
NOTE: Unless otherwise stated, upper- and lowercase text can be used
interchangeably in the commands.
ASCII to HEX Conversion Table
Space
•
Figure 22.
ASCII to Hexadecimal Character Conversion Table
DSC 401 and DSC 401 A User Guide • Remote Configuration and Control
40