Table of Contents
Advertisement
C
D
E
F
Powering On
To power on the DSC, plug the power supply into the 2-pole captive screw power
connector on the rear panel. The Power and Reset LED on the front panel blinks amber
while the unit is powering up.
When the unit is at full power but no video signal is present, the LED lights steadily amber. It
lights steadily green when the DSC is at full power and a video input signal is present.
On-screen Display (OSD) Menu
The OSD menu enables you to configure and adjust the DSC from submenus displayed on
a monitor or other display device connected to the rear panel output.
Menu Overview
The OSD menu has seven configuration submenus and one read-only information screen.
The
NOTE: The Device Info screen is read-only and gives current device status.
The menu screen always displays the following items, regardless of which submenu is
displayed.
•
•
•
•
— Connect a host to this USB-C configuration port for device
USB Config port
configuration with PCS or Toolbelt, control, file transfer, or firmware updates.
Signal Status LEDs (see
figure 8
indicate the following:
•
Signal In — An input signal is present.
HDCP In — The input signal is HDCP-encrypted.
•
•
HDCP Out — The output signal is HDCP-encrypted.
Menu and Enter buttons — Use these buttons to access the on-screen display
menus (see
Using the OSD Menu
buttons and the arrow buttons).
Navigation buttons — (Left
buttons to navigate through the OSD submenus, perform Image Reset (see
Reset (DSC 401 A Only)
on page 32), and reset the output rate (see
Output Resolution and Refresh Rate
Submenu Items
table on the next page shows the submenus and their options.
The Extron model name is in the blue title bar at the top.
The current input resolution and refresh rate are in the lower-left corner.
The current output resolution and refresh rate are in the lower-right corner.
The left column contains a list of all the submenus in the OSD. The currently
displayed submenu name is highlighted.
on the previous page) — These green LEDs light to
on the next page for detailed explanations of these
, right
, up
, and down
t
on page 33).
DSC 401 and DSC 401 A User Guide • Operation
arrows) Use these four
Image
Changing the
13
Advertisement
Table of Contents
