Table of Contents
Advertisement
Modifying the date and time of day
Normally the only change required will be to the time of day minutes,
in which case;
• Press and hold the Time button for 3 seconds,
the word Hold will show on the screen.
• After 3 seconds release the Time button
and the screen will show the year;
• Press the Time button repeatedly until the minutes are shown.
• Use Adv/Ovr or Boost to change the minutes to the correct value.
• Press the Time button once to return to operating mode.
Note: Other changes can be made the same way, but the Time button
must be pressed to return to operating mode after any changes.
There is no automatic exit from Time/date entry mode.
9. Programming ON/OFF times
6
The FST24/77 has 4 independent On/Off periods available for
programming each day.
For the FST24, 24 hours is the only option, so all 7 days will be the same.
For the FST77 there is a choice of programming options, including 7 days
the same (24 hours), 5 + 2 days (where the weekdays are the same,
and the two weekend days are the same), and 7 individual days.
• Press and hold the Prg button for 3 seconds,
the word Hold will show on the screen.
• After 3 seconds release the Prg button
and the MODE screen will be displayed;
• For the FST77 Use the Adv/Ovr or Boost
to change the day grouping mode.
This will step through the following options;
24 hour:
5 day:
Individual day:
Note: For the FST24, Mo Tu We Th Fr Sa Su is the only option.
Mo Tu We Th Fr Sa Su
Mo Tu We Th Fr (followed automatically
in programming by 2 day – Sa Su)
Mo (followed automatically in programming
by each of the other days of the week)
Advertisement
Table of Contents
