Table of Contents
Advertisement
• At this stage the output ON/OFF indicator (as in the above image)
may not reflect the current programme status accurately.
• If the time switch should be OFF now, leave as it is.
Note: The time switch will automatically turn ON at your desired
ON time, and will resume the next programme as normal.
• If the time switch should be ON now,
press the Adv button once and set it
to ON ADVANCE.
Note: The time switch will now automatically turn OFF at your
desired OFF time, and will resume the next programme as normal.
• In the same way as for individual programmes, days or groups
of days can be omitted either by leaving dashes in all the locations
for ON/OFF times for that day or group of days.
Alternatively, leaving the programme entry mode before filling in
all the ON/OFF times will leave the remaining times blank.
8
Note: The only way to re-enter a blank times (or dashes)
is to reset the unit.
Programming across midnight
• Enter the required programme 1 ON time.
• Set the programme 1 OFF time to 00:00 (i.e. midnight)
• Set the programme 2 ON time to 00:00 as well.
• Enter the required programme 2 OFF time for the next day.
Modifying or adding programmes
• Press and hold the Prg button for 3 seconds, the word Hold
will show on the screen.
• After 3 seconds release the Prg button and the MODE screen
will be displayed.
Note: This will automatically display the mode in which it was
last programmed. For instance, if it was programmed in 5 + 2,
then it will show Mo Tu We Th Fr.
Advertisement
Table of Contents
