2-3.
TOP PANEL BLOCK
3 Remove the top panel block
in the direction of the arrow.
7 top panel block
1 three screws
(BVTP3
Wire e i
Terminal face is
below side.
Terminal face is
below side.
–
e
ie
–
10)
6 wire (flat type)
(15 core)
(CN2100)
–
re r ie
–
Note 2: When installing the wire (flat type), ensure that
the colored line is not slanted after insertion.
OK
Insert is straight to the interior.
wire (flat type)
colored line
connector
2 five claws
5 wire (flat type)
(4 core)
(CN2102)
4 cushion (H)
NG
Insert is incline
wire (flat type)
colored line
connector
Wire e i
wire (flat type) (4 core)
guide line
guide line
guide line
guide line
wire (flat type)
(15 core)
cushion (H)
heat sink
Note 1: Fix the cushion (H) so that
the wire (flat type) does not
come in contact with the heat sink.
MHC-V5
9