MHC-V3/V4D
Ver. 1.3
Note: Follow the disassembly procedure in the numerical order given.
2-2.
SIDE L, R PANEL
1 two screws
(+BVTP 3
10)
4 panel, side L
3 Remove the panel, side L
in the direction of the arrow.
2-3.
TOP PANEL BLOCK
4 Remove the panel, top block
in the direction of the arrow.
9 panel, top block
3 six claws
(V4D)
8
10
2 two screws
(+BVTP 3
3 Remove the panel, side R
in the direction of the arrow.
CN3003 (4P)
10)
1 two screws
(+BVTP 3
10)
6
Remove the USB wire
from the clamp (L35)
5
wire (flat type) (13 core)
(CN114)
2 filament tape
7
CN6001 (5P)
PANEL board
2 two screws
(+BVTP 3
10)
4 panel, side R
1 two screws
(+BVTP 3
10)
Note: When installing the wire
(flat type), ensure that the
colored line is not slanted
after insertion.
OK
Insert is straight to the interior.
wire (flat type)
colored line
connector
NG
Insert is incline
wire (flat type)
colored line
connector
USB Wire
(CN6001) (5P)
clamp (L35)