HP x4000 Accessory Installation Manual page 50

Installing Accessories
Processor
10. Connect the heatsink turbo fan power connector to the system board.
The fan connectors are labeled and on the system board.
CPU0 CPU1
11. Replace the MEC card.
12. Replace the Chassis Beam Assembly (see page 23).
13. Close and secure the hard disk drive cage (see page 20).
14. Replace the Workstation's cover (see page 18).
15. Reconnect all the power and telecommunications cables.
16. Update your operating system (see page 49).
48 Chapter 2
This manual downloaded from http://www.manualowl.com