Toyotomi SONZAI Series User Manual page 49

DEHUMIDIFIER
Humidity
2. Humidity Button
Press this button to adjust the humidity. After each pressing of humidity button,
the set humidity will increase 5% in the range of 30% RH ~ 80% RH circularly.
Hold the humidity button can adjust the humidity quickly.
Fan
3. Fan Button
Press this button to switch from High fan speed to Low fan speed. When you
need fast dehumidifi cation, select high fan speed. When you need the unit to
work quietly, select low speed.
Lock Function: Hold Fan button for 3 seconds to enter or exit child lock status.
When the unit enters child lock status, the display window will fl ash "LC"
3 times. At this time, pressing other buttons will be invalid and "LC" will be
displayed.
UV
4. Air Sterilization UV Button
Under dehumidifi cation mode, it's defaulted that Air sterilization UV function is
turned on. Press this button once only to turn off or turn on the Air Sterilization
UV function. Hold this button for 3 seconds to enter or exit single Air Sterilization
UV mode. Under single Air Sterilization UV mode, the dehumidifi cation function
will be off, and the display window will display "- -».
5. Filter Button
WiFi
Whether the unit is turned on or turned off, press WiFi button can turn on or
turn off WiFi function. Whether the unit or WiFi is turned on or turned off, hold
WiFi button for 5 seconds to reset WiFi. At the same time, WiFi function will
be turned on.
6. Display/Control Panel
The humidity display window is defaulted to display current environment
humidity level. If press humidity button to adjust the humidity, it will display the
set humidity. 5 seconds later, it will turn back to display the ambient humidity.
GB
49