Assembly To The Brake Lever - Shimano DEORE Series Dealer's Manual

MAINTENANCE
Replacing the brake hose

Assembly to the brake lever

1.
Pass the cover, connecting bolt, and olive over the brake hose in the
order shown below.
2.
Check that the olive is in the position shown in the figure, and then
apply Premium Grease to the threads of the connecting bolt and outer
surface of the olive.
3.
Install the brake hose in the brake lever.
Insert the hose up to the witness mark added beforehand on the surface of the hose is
covered.
Cover
Connecting bolt
Brake hose
Connecting bolt
Witness mark
Witness mark
Connecting bolt
Olive
Premium Grease
Brake hose
Connector insert
53
2 mm