Connecting The Hose - Shimano DEORE Series Dealer's Manual

INSTALLATION/REMOVAL
Installing the brake hose

Connecting the hose

1.
Remove the hose cap.
If the brake hose was cut, it is not necessary to remove the hose cap.
2.
Pass the hose cover over the brake hose.
3.
Secure the brake lever with a tool such as a vise.
Secure the hose connection port so that it is facing upward.
4.
Remove the seal plug.
Use a clean rag to keep oil from dripping off the seal plug.
Hose cover
Seal plug
32