INSTALLATION/REMOVAL
Installing the disc brake rotor
Installing the disc brake rotor
1.
Check that the spokes are laced as shown in the figure.
Radial lacing cannot be used.
Front left
2.
Set the disc brake rotor on the hub, and then secure it with the disc
brake rotor lock ring.
Secure with TL-LR15 and an adjustable wrench or TL-FC36.
Disc brake rotor lock ring
Lock ring tightening tool
Rear left
Rear right
TL-LR15 and adjustable wrench
Front right
Disc brake rotor lock ring
Lock ring tightening tool
40 N·m
Internal spline type
14
External spline type
TL-FC36