Removing The Disc Brake Rotor; Installing The Brake Caliper; Post Mount Type - Shimano DEORE Series Dealer's Manual

INSTALLATION/REMOVAL

Removing the disc brake rotor

Removing the disc brake rotor
Perform the removal of the disc brake rotor in the reverse order from the installation
procedure.

Installing the brake caliper

Post mount type

1.
Install the wheel with an attached disc brake rotor onto the frame.
2.
Remove the bleed spacer (yellow).
(1) Close the tip of the split pin.
(2) Remove the split pin.
(3) Remove the bleed spacer (yellow).
(1)
(2)
Split pin
(3)
Bleed spacer (yellow)
15