Cutting The Hose - Shimano DEORE Series Dealer's Manual

INSTALLATION/REMOVAL
Installing the brake hose

Cutting the hose

Use care when cutting the hose, as oil may leak when the hose is cut.
NOTICE
• Make sure to also refer to the manual for SHIMANO original tool TL-BH62.
• Do not move the lever indicated in the figure
before disassembling SHIMANO original tool
TL-BH62.
1.
Determine the appropriate length and add a witness mark on the
brake hose.
Add the mark so it is aligned with the edge of the connecting bolt.
Witness mark
Connecting bolt
26