Toshiba E-STUDIO2323AM Topaccess Manual page 73

5.[Administration] Tab Page
Item name
Resolution
4
Only [A5-R] and [ST-R] are available for Original Size if you have selected [Full Color] for Color Mode and
[600dpi] for Resolution.
5
Single/2-Sided Scan
6 Original Size
Only [A5-R] and [ST-R] are available for Original Size if you have selected [Full Color] for Color Mode and
[600dpi] for Resolution.
7
Mixed Original Sizes
8 Original Mode
You cannot specify this item if you have selected [Gray Scale] for Color Mode.
9 Rotation
10 Compression
11 Exposure
You cannot specify this item if you have selected [Gray Scale] for Color Mode.
12 Omit Blank Page
You cannot specify this item if you have selected [Full Color] or [Gray Scale] for Color Mode.
13 Continue Scan
*1 This item is available only for the equipment in which the Reversing Automatic Document Feeder is installed.
Select the resolution for scanning.
*1 Select whether to scan one side or both sides. You can specify this item only
when the Automatic Duplexing Unit is installed.
 Single —Select this to scan one side of the document.
 Duplex — Select this to scan both sides of the document.
Select the document size.
*1 Select whether the document contains pages in different sizes. You can
specify this item only when you have selected [Auto Sizes] for Original Size.
Select the document type of the originals.
 Text/Photo —Select this to set the Text/Photo mode.
 Text — Select this to set the Text mode.
 Photo — Select this to set the Photo mode.
Select how the scanned images will be rotated.
Select the compression rate for the scanned data.
Select the color density of the scanned image.
Select [Auto] to automatically apply the best contrast for the document. You
can also manually adjust the contrast in nine levels.
The overall image becomes darker as you move the setting value towards the
right.
Select whether to automatically discard blank pages in the scanned image if it
is contained in the originals.
 OFF —Includes blank pages.
 ON — Discards blank pages.
Sets whether to automatically finishes the scanning or not when all the
originals set on the RADF is scanned.
 OFF —The scanning finishes when all the originals set on the RADF are
scanned.
 ON — Select this to continue the scanning when all the originals set on the
RADF are scanned.
Description
[Registration] Item List 73