Toshiba E-STUDIO2323AM Topaccess Manual page 53

5.[Administration] Tab Page
Item name
10 ECM
11 Discard
12 Reduction
13 Journal Auto Print
14 Memory Transmission Report Select how to print a result report after a memory transmission.
15 Multi Transmission Report
Select whether to enable or disable the ECM (Error Correction Mode) to
automatically re-send any portion of the document affected by phone line
noise or distortion.
Select whether to discard the lower portion of the received
fax image if it is larger than the recording paper.
Select whether to reduce the received fax image if it is larger than the effective
printing area of the recording paper.
Select whether to automatically print a transmission and reception journal
after every transmission completed.
 OFF — Select this to not print a memory transmission report.
 Always — Select this to print a memory transmission report with all page
images for each memory transmission completed.
 ON ERROR — Select this to print a memory transmission report with all
page images only when the memory transmission is not successfully
completed.
 Always(Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image for each memory transmission
completed.
 ON ERROR(Print 1st Page Image) — Select this to print a memory
transmission report with the 1st page image only when the memory
transmission is not successful.
Select how to print a result report after a multi-address transmission.
 OFF — Select this to not print a multi-address transmission report.
 Always — Select this to print a multi-address transmission report with all
page images for each multi-address transmission completed.
 ON ERROR — Select this to print a multi-address transmission report with
all page images only when the multi-address transmission is not
successfully completed.
 Always(Print 1st Page Image) — Select this to print a multi-address
transmission report with the 1st page image for each multi-address
transmission completed.
 ON ERROR(Print 1st Page Image) — Select this to print a multi-address
transmission report with the 1st page image only when the multi-address
transmission is not successful.
Description
[Setup] Item List 53