Add Cue Marks Automatically During Recording; Moving To The Cue Mark Position - Tascam DR-44WL Reference Manual

4 – Recording
Add cue marks automatically during
recording
When you turn the AUTO MARK function ON, cue marks can be
added automatically according to the operating level and time.
8 Add cue marks automatically according to set levels
1. Press the MENU button to open the MENU screen.
2. Using the wheel, select (highlight) AUTO FUNCTION and
press the ENTER/MARK or / button.
AUTO FUNCTION screen is displayed.
3. Using the wheel, select (highlight) MODE for AUTO MARK and
press the ENTER/MARK or / button.
4. Use the wheel to set the automatic cue mark mode to
LEVEL.
Options: OFF (default value), LEVEL, TIME
5. Press the ENTER/MARK button to finalize the set mode.
6. Using the wheel, select (highlight) LVL/TIME for AUTO MARK
and press the ENTER/MARK or / button.
7. Use the wheel to set a level to automatically add cue marks.
Options: -6dB, -12dB (default value), -24dB, -48dB
8. Press the ENTER/MARK button to finalize the set mode.
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
8 Add cue marks automatically according to set time
1. Press the MENU button to open the MENU screen.
2. Using the wheel, select (highlight) AUTO FUNCTION and
press the ENTER/MARK or / button.
AUTO FUNCTION screen is displayed.
3. Using the wheel, select (highlight) MODE for AUTO MARK and
press the ENTER/MARK or / button.
4. Use the wheel to set the automatic cue mark mode to TIME.
5. Press the ENTER/MARK button to finalize the set mode.
28
TASCAM DR-44WL
6. Using the wheel, select (highlight) LVL/TIME for AUTO MARK
and press the ENTER/MARK or / button.
7. Use the wheel to set a time to automatically add cue marks.
Options: 5min, 10min, 15min, 30min, 60min (default value)
8. Press the ENTER/MARK button to finalize the set time.
9. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
8 Adding marks automatically when the PEAK
indicator lights
1. Press the MENU button to open the MENU screen.
2. Use the wheel to select AUTO FUNCTION, and press the
ENTER/ MARK or / button.
The AUTO FUNCTION screen opens.
3. Use the wheel to select the PEAK MARK item under AUTO
MARK, and press the ENTER/MARK or / button.
4. Use the wheel to turn the PEAK MARK function ON.
Options: OFF (default), ON
5. Press the ENTER/MARK button to confirm the setting and
reenable setting item selection.
6. When finished making the setting, press the 8/HOME
button to return to the Home Screen.
NOTE
• Marks are added two seconds before a PEAK indicator
lights.
• For 10 seconds after a mark is added because a PEAK
indicator lit, no other mark will be added if the PEAK
indicator lights again or an automatic mark would normally
be added according to the LEVEL setting.
• Marks added because of a PEAK indicator lighting will not
cause division when the automatic division function is used.

Moving to the cue mark position

During pause, you can move to a cue mark registered in the
selected file. When multiple cue marks exist, you will move to
the nearest cue mark to the present cue mark.
You can use this function to go to the beginning of a song,
similar to an index.
1. During pause or playback, while pressing the ENTER/MARK
button, press the . button or the / button.
NOTE
You cannot move to a cue mark of a different file.