Create Cue Marks During Recording; Manual Cue Marking During Recording; Add Cue Marks Automatically To Recording - Tascam DR-22WL Reference Manual

4 – Recording
2. To switch to the overdubbing mode, press the F2
button. The overdubbing and AIRDUB modes will appear in
turn on the screen.
After selecting, either the OVERDUB or the AIRDUB screen will
be displayed.
AIRDUB mode
3. Press the PLAY button to play the file for overdubbing, and
use the F3 and F4
buttons to adjust the playback
volume.
4. Press the RECORD button to set the recording standby
mode.
The indicator around the RECORD button flashes.
5. Press again the RECORD button.
Overdubbing will start.
When recording starts, the RECORD indicator lights, and the
recording screen displays the elapsed recording time and
the remaining recording time.
6. To finish recording, press the
22
TASCAM DR-22WL
/MENU/8 button.

Create cue marks during recording

In recording or recording standby mode, the DR-22WL can
create cue marks to a file to quickly locate the marked position
and start playback. (See "Moving to the cue mark position" on
page 29.)
You can either manually set the cue mark, or automatically set
the cue mark level or time to minimize the operation noise.
NOTE
The unit will not move to the cue mark position in recording
or recording standby mode.

Manual cue marking during recording

In recording or recording standby mode, press the F2
to create a cue mark.
A pull-up cue mark no. message will appear above the icon.
NOTE
• Up to 99 cue marks can be created and stored in each file.
• Cue marks that are created during the recording of WAV file
in BWF format by this unit are stored in the file. You can use
the cue marks in softwares compatible with BWF format.

Add cue marks automatically to recording

If you turn the AUTO MARK function ON, cue marks will be
added automatically.
8 Add cue marks automatically according to set levels
1. Press the /MENU/8 button to display the menu screen.
2. Press the F1 button to open the REC SETTING menu
page.
3. Use the F2 and the F3
the parameter of the AUTO FUNC item and press the F4
button.
AUTO FUNCTION screen is displayed.
4. Use the F2 and F3
buttons to select (highlight) the
MODE in the AUTO MARK item, and press the F4
5. Use the F2 and F3
buttons to set the automatic cue
mark mode to LEVEL.
Options: OFF (default value), LEVEL, TIME
6. Press the F4 button to finalize the set mode.
7. Use the F2 and F3
buttons to select (highlight) the
LVL/TIME of the AUTO MARK item and press the F4
This shows the LVL/TIME item parameters.
button
buttons to select (highlight)
button.
button.