Selecting Operation Mode; Setting A Mode; Checking Mode - Tascam DR-44WL Reference Manual

• When an external audio device with a fixed output line level
is connected, it would be impossible to control the gain level
appropriately because of excessively large input signals. In
such cases, use the headphone jack or other level-control-
lable output for connection to the unit.

Selecting Operation Mode

Two operation modes are available in this unit: 4CH and MTR
modes. (See "Overview of recording modes" on page 18.)

Setting a mode

1. Press the MENU button to open the MENU screen.
2. Using the wheel, select (highlight) MODE menu item and
press the ENTER/MARK or / button.
The MODE screen is displayed.
3. Using the wheel, select (highlight) MODE and press the
ENTER/MARK or / button.
4. Use the wheel to select operation mode.
Options: 4CH (default value), MTR
5. Once the setting has been completed, press the 8/HOME
button to return to the Home screen.
NOTE
The selected mode is stored and started in the selected
mode when the power is turned on next time.

Checking mode

When the operation mode is set to MTR, the MTR indicator on
the top of the display lights up.
3 – Preparation
17
TASCAM DR-44WL