Sensors; Transport Sensor (S2) (S7) - Ricoh PB3280 Field Service Manual

2.Replacement and Adjustment

Sensors

Transport Sensor (S2) (S7)

Remove the paper feed unit
1.
Remove the transport sensor bracket [A] (
2.
Remove the transport sensor (S2) (S7) [A] (
3.
Metal cover [A] for antistatic control has been added to the transport sensor.
When replacing the sensor, this cover will also be used after replacement, so remove it from the
old sensor. When you do so, be careful not to deform or damage anything.
16
(2nd Paper Feed Unit,
×1).
×1).
1st Paper Feed Unit).