Sensors and Board
•
Unplug the machine power cord before starting any of the following procedures.
Paper End Sensor (S2)
This procedure is common to the single paper feed unit and the double paper feed unit.
Remove the vertical transfer roller unit
1.
Do the following:
2.
Remove the paper end feeler [A] (
1.
Remove the paper end sensor (S2) [B] (
2.
Tray Lift Sensor (S3)
This procedure is common to the single paper feed unit and the double paper feed unit.
Remove the vertical transfer roller unit
1.
Remove the tray lift feeler [A] (
2.
Remove the tray lift sensor (S3) [B] (
1.
(Vertical Transfer Roller (Driving
x 2).
x 2,
(Vertical Transfer Roller (Driving
x 2).
x 2,
x 1).
2.Replacement and Adjustment
Side)).
x 1).
Side)).
25