PURE Elan Connect User Manual page 13

Select control button – cycles forwards and backwards through the current menu or setting
options.
Back – jumps back to the parent menu of the currently displayed menu or setting.
Menu to return to the Now Playing screen.
Equaliser
This presents a My Equaliser option to allow you to create your own equaliser settings.
Normal
Flat
Jazz
Rock
Movie
Classic
Pop
News
My EQ
My EQ profile setup
This option allows you to set a bias in the treble and bass audio frequencies and turn 'Loudness'
On or Off. Values can be set between -14 (Minus 14) and +14 (plus 14).
Treble – (Use the select control button to choose a bias value between -14 and +14)
Bass – (Use the select control button to choose a bias value between -14 and +14)
Loudness – Off or On. (When On, low-level high and low frequency sounds areboosted
to give a 'fuller' sound.)
Time/Date
The time and date can be updated manually or automatically. With auto-update, the time and
date are automatically broadcast over Internet, DAB and FM radio (when available).
You can also select the display format for the time and date.
The Time menu contains the following options:
Set Time/Date – (see below)
Auto update - Update from DAB | Update from FM | Update from Network | No Update
Set format - 12 | 24
Set timeze - UTC +/- hours
Daylight savings - On/Off
Set time/date
This option is for manually setting the time and date displayed. The date displays as DD-MM-
YYYY, with the first value, DD, active (flashing). Adjust each value using the select control button
and press Select to confirm. The next value then becomes active and flashes. The time values
follow and are set in the same way.
Language
The default language is English. To change, select Menu > System settings > Language >then
select your language.
Factory reset
A factory reset clears all user defined settings, replacing them with the original default values, so
time/date,preferences/ settings and DAB station list are all lost.
If you select Factory reset, you are asked to confirm by selecting "Yes".
Backlight
The Elan Connect has a backlight with three brightness settings, and adjustable timeout (this is
the time delay, in seconds, after which the display switches to the Dim level).
There are three settings:
Timeout - Light On | 10 | 20 | 30 | 45 | 60 | 90 | 120 | 180 sec
On level - High | Mid | Low
Dim level - High | Mid | Low