System Settings - PURE Elan Connect User Manual

I
In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm
2 icons.
At the set time, the alarm will sound, quietly at first, then gradually building up to the set volume.
When an alarm sounds, the icon in the display flashes.
To cancel a sounding alarm and switch the radio to standby long press the select dial.
Snooze
To temporarily silence a sounding alarm, press Snooze.
You can change the snooze period by repeatedly pressing the select button.
Snooze periods are 5, 10, 15 and 30 minutes.
The radio returns to standby for the set time period with a snooze countdown displayed. When
the countdown reaches 0 (zero) the alarm is triggered again.
Long press the select dial to fully cancel a sounding alarm and switch the radio to standby.
Sleep
To set the sleep timer while the radio is playing Press Sleep. You can choose the sleep delay time
in minutes from: Sleep Off | 15 |30 | 45 | 60 | 90.
Use select control button to cycle through the options (or press Sleep repeatedly) then press
Select to choose the displayed option.
Once you select a sleep delay period, the display returns to the Now playing screen displaying a
Crescent moon icon and the remaining time, in minutes, before the sleep time expires.
After the sleep delay period the radio switches to standby mode.

System Settings

The System Settings allow you to tailor the Elan Connect with a variety of options to suit you.
To access system settings from any mode Select Menu >System Settings >, then choose from the various
options as described in the menu as below.
The System Setting Menu options are:
Equaliser
Sleep
Alarm
Streaming audio quality
Network
Time/Date
Language
Factory reset
Software update
Setup wizard
Info
Privacy policy
Backlight
To navigate through the menus
The following controls are used to move about the menu tree to choose and select the required
settings:
Select – (pressing the Select control button) this selects the currently displayed option, if the option has
a further sub-menu the first option of the sub-menu is displayed. If the option is a setting value, the
displayed value is selected and either the next setting is highlighted or, if there are no further settings,
the display returns to the parent menu for that setting.