Electrical Power Requirements; Grounding Instructions; Immobilization Method - Life Fitness PowerMill 95PS-XX03 Assembly Instructions Manual

Electrical Power Requirements

The PowerMill with the Integrity and Discover consoles require an AC power supply according to the electrical
configurations listed in the chart below.
Console
Integrity X/ C, Integrity
with Attachable TV,
Integrity SL, Discover / ST
Outlet Voltage
120 VAC
230 VAC
NOTE: Do not modify the plug provided with this product. If the plug does not fit into an available electrical outlet,
have a proper outlet installed by a qualified electrician.

Grounding Instructions

This product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a path
of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equipment.
Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding
plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all
local codes and ordinances.
NOTE: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North America. If a
properly grounded, 15-amp outlet is not available, one must be installed by a qualified electrician. For use on a
nominal 120-V circuit, this product has a grounding plug that looks like the one in the accompanying illustration. Make
sure that the product is connected to an outlet having the same configuration as the plug.
DANGER: A risk of electrical shock may result from improper connection of the equipment grounding
conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify the
plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified
electrician. Any modification to the electrical plug will result in a voided warranty.

Immobilization Method

The purpose of immobilizing the PowerMill is to prevent unauthorized use. The system causes immobilization of the
PowerMill when a pre-defined hard key sequence has been activated.
To prevent false toggling of the Immobilized feature, this sequence must be done in a 5-10 second period.
1. Press the STOP key 3 times.
2. Press the SPEED DOWN arrow key 3 times.
Supply Voltage Frequency
100 - 240 VAC 50 - 60 Hz
Page 6 of 23
Output Voltage
24 VDC
Commercial Units Outlet & Breaker (Amps)
20 (no more than 1 PowerMill per breaker)
12 (no more than 1 PowerMill per breaker)
Item
1 Grounded Outlet Box
2 Grounded Outlet
3 Grounding Pin
Output Current
5A
Description