Table of Contents
Advertisement
How to Stabilize Unit
After placing the unit in position, check the unit's stability by attempting to rock it. Any slight rocking indicates that the
unit must be leveled. There are four stabilizing feet on the unit. Check the front and back stabilizing feet to determine
which foot does not rest fully on the floor. Rotate the foot counterclockwise to lower it. Recheck the stability and adjust
again as needed until the unit is stable and no longer rocks. Lock the adjustment into position by tightening the jam
nut against the stabilizer bar with an open end 17mm wrench.
Page 8 of 23
- Quick Links:
- How To's
Hide quick links:
Advertisement
Table of Contents
