To Set Weekly Timer Operation - Daikin Siesta ATXM20R2V1B User Reference Manual

6.11.1 To set Weekly timer operation

ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
Daikin room air conditioner
4P518786-6F – 2020.06
Note: Be sure to aim the user interface at the indoor unit and check for a receiving
tone when setting the Weekly timer operation.
INFORMATION
The clock MUST be set correctly before using any timer functions. Refer to
4
set the clock" [
INFORMATION
▪
Weekly timer and OFF/ON timer operation CANNOT be used at the same time.
The OFF/ON timer operation takes priority. Weekly timer will be in standby,
disappears from the LCD. When the OFF/ON timer is completed, the
Weekly timer becomes active.
▪
The day of the week, OFF/ON timer mode, time and temperature (only for ON
timer) can be set with the Weekly timer. Other settings are based on previous ON
timer setting.
1 Press .
Result: The day of the week and the reservation number of the current day
are displayed.
2 Press or to select the day of the week and the reservation number.
3 Press .
Result: The day of the week is set.
4 Press or to select the mode.
Result: The setting will change as follows:
Display
Blank
5 Press .
Result: The OFF/ON timer mode is set.
Note: Press to return to the previous screen. If blank is selected, continue
to step 9.
6 Press or to select the time. The time can be set between 0:00~23:50 in
10-minute intervals.
18].
and
Feature
ON timer
OFF timer
Deletes reservation
6 Operation
|
"5.4.1 To
blink.
and the time blink.
User reference guide
31