To Start/Stop Comfort And Intelligent Eye Operation; Powerful Operation - Daikin Siesta ATXM20R2V1B User Reference Manual

6 | Operation

6.6.3 To start/stop Comfort and Intelligent eye operation

6.7 Powerful operation

User reference guide
26
Vertical angle (side view)
▪ Detection sensitivity. Changes according to location, the number of persons in
the room, temperature range, etc.
▪ Detection mistakes. The sensor may mistakenly detect pets, sunlight, moving
curtains, etc.
1 Press one or more times.
Result: The setting will change as follows:
Display
+
—
Note: If there are people close to the front of the indoor unit or there are too
many people, use both operations at the same time.
2 To stop operation, press
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
Mode
Cooling/Heating
Drying
Fan only
90°
Operation
Comfort airflow
Intelligent eye
Comfort airflow and Intelligent eye
Both deactivated
until both symbols disappear from the LCD.
Airflow rate
▪ To maximize the cooling/heating
effect, the capacity of outdoor unit is
increased.
▪ The airflow rate is fixed to the
maximum setting.
▪ The temperature and airflow settings
CANNOT be changed.
▪ The temperature setting is lowered by
2.5°C.
▪ The airflow rate is slightly increased.
The airflow rate is fixed to the
maximum setting.
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
Horizontal angle (top view)
55° 55°
Daikin room air conditioner
4P518786-6F – 2020.06