To Adjust Vertical Airflow Direction; To Adjust Horizontal Airflow Direction; To Use 3-D Airflow Direction - Daikin Siesta ATXM20R2V1B User Reference Manual

6 | Operation

6.5.1 To adjust vertical airflow direction

6.5.2 To adjust horizontal airflow direction

6.5.3 To use 3-D airflow direction

User reference guide
24
CAUTION
ALWAYS use a user interface to adjust the position of the flaps and louvers. When
the flaps and louvers are swinging and you move them forcibly by hand, the
mechanism will break.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b c
a Flap range in cooling or drying operation
b Flap range in heating operation
c Flap range in fan only operation
1 Press .
Result: appears on the LCD. The flaps (horizontal blades) will begin to
swing.
2 To use fixed position, press
Result: disappears from the LCD. The flaps will stop moving.
1 Press .
Result: appears on the LCD. The louvers (vertical blades) will begin to
swing.
2 To use fixed position, press
Result: disappears from the LCD. The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
1 Press and
Result: and
louvers (vertical blades) will begin to swing.
2 To use fixed position, press
the desired position.
Result: and
stop moving.
when the flaps reach the desired position.
when the louvers reach the desired position.
.
appear on the LCD. The flaps (horizontal blades) and
and
disappear from the LCD. The flaps and the louvers will
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
when the flaps and louvers reach
Daikin room air conditioner
4P518786-6F – 2020.06