To Mount The User Interface Holder; About The Clock; To Set The Clock - Daikin Siesta ATXM20R2V1B User Reference Manual

5 | Before operation

5.3 To mount the user interface holder

5.4 About the clock

5.4.1 To set the clock

User reference guide
18
a b c
a User interface
b Screws (field supply)
c User interface holder
1 Choose a place where the signals reach the unit.
2 Attach the holder with screws to the wall or a similar location.
3 Hang the user interface on the user interface holder.
If the indoor unit's internal clock is NOT set to the correct time, the ON timer, OFF
timer and weekly timer will NOT operate correctly. The clock must be set again:
▪ After a circuit breaker has turned the unit OFF.
▪ After a power failure.
▪ After replacing batteries in the user interface.
Note: If the time is NOT set,
1 Press .
Result: and blink
2 Press or to set the current day of the week.
Display
3 Press .
Result: blinks.
2×
, , and blink.
Day of the week
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
ATXM20~35R2V1B + ATXM50R2V1B + ATXM20~35R5V1B
Daikin room air conditioner
4P518786-6F – 2020.06